Rotometals.com

Hardball Bullet Casting Alloy consists of 2% tin, 6% antimony and 92% lead. This modern version of the old Lyman #2 is an excellent all-around alloy for most handgun bullets and many higher velocity...

Special Order "Hard-ish"  Bullet Casting Alloy consists of 2% tin, 4% antimony and 94% lead.  similar to hardball  but less antimony so not as hard,  Sold in ~5 pound ingots...

Sold in 5 pound increments. These ingots are made of 99.9%+ new, clean lead. The ingots measure 8-3/4" x 1" x 2" and weigh approximately 5 pounds. The Brinell Hardness scale of 99.9% Lead is...

Sold by the Ingot, or Bag The Linotype alloy consists of 4% tin, 12% antimony and 84% lead; each bar measures approximately 8-3/4" x 1" x 2" and weighs approximately 5 lbs (+/- .25). This very...

This is a pallet of lead wire spools. Each weighs 140lbs and there 8 total spools per pallet. You can choose your desired sizes... Made to order ~2 week lead time   1/8" Diameter (3.175...

Looking for affordable lead for weights? These lead chunks are the ideal solution for your needs.   These "chunks" are made from high-quality lead with a minimum purity of 99.4% Grade A,...

    This is a pallet of scrap sheet lead in various sizes pieces, shavings, and thickness.  All is 99.4% min grade A, easy to melt and make things out of, Very clean   SHIPS...

Sold in ~5 pound increments. Our Lyman #2 alloy (90% Lead, 5% Tin, 5% Antimony) comes in an ingot that measures approximately 8-3/4" by 1" x 2" and weighs approximately 5 lbs. (+/-.25)  The...

5 pound ingot This ingot measures approximately 8-3/4" x 1" x 2"/ This is an alloy of 30% Antimony and 70% Lead that is a great source for hardening up your lead or wheel weights and is much easier...

Type 1.5 pound Crab Pot Zinc Anode that ties on. These anodes are manufactured in bundles of 5 that are designed to break apart, but are sold individually. They measure approximately 7" long and 1"...

Type 1 lb Zinc Crab/Lobster Pot anode has a .5"/13 NC thread coupling nut that screws on. This anode is 5/8" thick and has 3-3/8" diameter. Hand poured  weigth vary 0.9-1.1...

Type 3 lb Zinc Crab/Lobster Pot anode has a .5"/13 NC thread coupling nut that screws on. This anode is 1.5" thick and has 3-3/8" diameter.   ELEMENT Zn % BalanceFe % 0.001Cu % 0.001Cd % 0...