Rotometals.com

Anodes contain straight 3/4" steel core rod for direct welding or assembly to two flat bars with “U” bolts as shown. Threaded rod may be substituted for an extra fee. Zinc Ballast Tank...

Anodes contain straight steel core rod for direct welding or assembly to two flat bars with “U” bolts as shown. Zinc Ballast Tank Anodes are typically used on tankers and large...

Sold by the Ingot Zinc Based Pewter comes in an ingot that weighs approximately 4lbs (3.9lbs - 4.1lbs) and measures 1" x 2" x 8.5" with tapered sides. This alloy has a composition of 93% Zinc, 4%...

This is a ball-sized Zinc Cannon Ball for a golf ball mortar.Each cannon ball weighs about ~2.3 ounces , measures approximately 0.99- 1.003" and is made from new clean zinc.  Come right out of...

This is a 2.219 " Zinc Cannon Ball for a Pop Can Mortar.   Zinc cannon ball for 2 ¼ steel lined bores.   For use in 2-1/4 inch steel-lined bores such as those made...

This is a 2.59" Zinc Cannon Ball for a Pop Can Mortar. Each cannon ball weighs about 2.3 pounds and is made from new clean zinc. Come right out of the mold for you to cut off gates and grind to your...

This is a golf ball-sized Zinc Cannon Ball for a golf ball mortar.Each cannon ball weighs about 0.6 pounds, measures approximately 1.67"   up to 1.70  and is made from new clean zinc...

This is a cast zinc plate that is 1/2" X 4" X 36  " weighs about 18 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process.  +/-...

This is a zinc cast plate. We pour these plates at 24"x 48" and they can shrink a little during the solidifying process. The plate is hand poured, and the top and bottom will not be perfectly smooth,...

This is a zinc cast plate. We pour these plates at  about 1.875"x25" x25" and they can shrink a little during the solidifying process. The plate is hand poured, and the top and bottom will not...

This is a cast zinc plate that measures 1" X 12" X 12" and weighs approximately 37 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process...

This is a cast zinc plate that is 1" x 6" x 6" and weighs approximately 9.3 pounds. Expect some chill lines and a cast finish, some air can get trapped during this process...