#70-5 Acid Paste Flux 2 Oz Tins
- SKU:
- #70-5_Acid_Paste_Flux_2oz
- MPN:
- #70-5
- Availability:
- in stock
- Weight:
- 0.13 LBS
- Minimum Purchase:
- 1 unit
- Shipping:
- Calculated at Checkout
Description
70-5 Acid Paste Flux 2 Oz Tins
Instructions for Flux No 950:
1. Clear surface to be soldered. Remove dirt, rust, grease, paint, etc. with sandpaper, wire brush, steel wool, etc. Proceed once clean metal is visible.
2. Brush FLUX onto all surfaces to be soldered. Fluxing is critical. Solder will not bond without FLUX.
3. Apply heat. Bring to melting temperature. Apply solder. Remove heat. Allow to cool. Remove residue with rag.
Related Products
Related Products
#70 Petroleum Paste Flux 2 Oz Tins
$7.99
Instructions for Flux No 70:
1. Clear surface to be soldered. Remove dirt, rust, grease, paint, etc. with sandpaper, wire brush, steel wool, etc. Proceed once clean metal...
#950 Rosin Paste Flux 2oz Tin
$7.99
Superior No. 950 is a Petrolatum-based soldering paste that contains a Rosin and organic acid activator. The Rosin helps protect the solder joint against corrosive attack, and the paste form insures...
On Sale
70 Tin/30 Lead Bar Solder
Rotometals.com
Now:
$18.99
Was:
$22.99
This is a 70% Tin, 30% Lead solid bar solder. The bar measures about 13.5" x .75" x .25" and weighs between 0.7-1.5 pounds. The approximate melting temperature is 361-380 F. This alloy is used for...
30 Tin/70 Lead Bar Solder
Rotometals.com
$13.99
30% Tin 70% Lead Bar Solder. This solid bar weighs between 0.7-1.5 and is about 13 3/4 x 3/4 x 3/8 . The approximate melting temperature is 361F.
**SOLD BY THE POUND. Each bar varies in...
Galvanizing Solder Repair Flux - 1.5 oz Bottle
Rotometals.com
$7.28
1.5 oz bottle of No. 71 Flux. This flux comes in paste form and is easy to spread with a brush, swab or by dipping. No. 71 Flux is a water-based, inorganic-acid flux formulated for soldering zinc...
Flux for retinning copper pots 4 oz Bottle
Rotometals.com
$11.99
4 oz bottle of No. 30 Flux. This flux recommended range is 200-600 F is a water-based, organic acid (OA) flux with fully water-soluble post-solder residues. The OA Amino Acid/Halide activator begins...
Zinc Sheet Solder Flux - 1.5 oz Bottle
Rotometals.com
$7.99
1.5 oz bottle of No. 71 Flux. This flux comes in paste form and is easy to spread with a brush, swab or by dipping. No. 71 Flux is a water-based, inorganic-acid flux formulated for soldering zinc...
AIM Rage - 35 Liquid Flux 5 Gallon
AIM
$490.00
R.A.G.E. (Rosin Activated Glycol Ether)
a fully activated formulation of rosin-based flux. This product features a high boiling point as well as a slow evaporation rate.
R.A.G.E. is...
Lyman #2 Bullet Metal ~ 5 pound Ingot (90% Lead, 5% Tin, 5% Antimony)
Rotometals.com
MSRP:
$25.99
$24.99
Sold in ~5 pound increments.
Our Lyman #2 alloy (90% Lead, 5% Tin, 5% Antimony) comes in an ingot that measures approximately 8-3/4" by 1"